Shelving accessories
Customize your shelving with our wide range of accessories. Units can be added and retrofitted after installation as your needs change.
Organization and identification
Use partial dividers, full-height dividers or dividing rods to create physical separation between items. Use label holders to identify contents and ensure everything is in the right place.
360-degree use
Unlock the full potential of your shelving by using the exterior and interior sides to hang various items. With our utility panels, hooks, spool holders, and more, the shelving becomes much more than just a simple set of posts and shelves.
Door types
Choose from our many door options, including solid, polycarbonate, full-height and stacked. The door frame allows for installation of drawers and roll-out shelves, or a combination of the latter with standard shelves behind.
A wide range of accessories to customize your storage space

Prevents the drawer from opening by itself. Drawer closes with a simple push

Activated with the right hand by sliding the mechanism with thumb. Stops drawer and roll-out shelf from opening on their own.

Locks a single drawer. Compatible with all drawer dimensions. Does not reduce the drawer's storage space.

Locks a bank of drawers in shelving with either a key or a padlock. Possible to install more than one bar on the same bracket for different users.

For both drawers and roll-out shelves. Locks drawers and roll-out shelves in open position. Activated manually, only when required.

Blocks access between two drawers with locks.

Simplifies storing, moving and managing small parts.

Fast hook-on assembly. Very useful at ends of aisles. Ideal for all brands of bins from 5" to 7"High.

Simple and fast installation. Installs by hooking to the shelving posts. 80 lb capacity per rail.

Optimizes storage of spools in shelving. Design allows for pivoting of rail to facilitate changing spools.

Allows for storage of popular sized tires of different dimensions up to 17" in diameter (light truck and SUV). 340 lb. capacity per pair. Constructed with a sloped surface to prevent the deformation of tires

300 lbs capacity per rail. Installs on Spider® post with hooks, no bolts.

50 lbs capacity per hook. Can be put on and taken off even when the rail is in place on the adaptors.

Equipped with a stop plate which facilitates the gripping of the batteries by eliminating the pressure on the first battery and by freeing the fingers. Special paint to promote the slipping of the batteries.

Finishing panel for end of aisle unit. Fast and easy hook-on assembly.

SH65 panel: installs inside a shelving unit between two shelves. SH66 panel: can be installed on either the inside or outside of the upright. Simple assembly, no tools required.

The SH67 back utility panel installs on either the inside or the outside upright. Simple assembly, no tools required. Capacity: 50 lb/square foot, maximum of 300 lb per panel, evenly distributed load.

The SH68 side utility panel installs on either the inside or the outside upright. Available in 4 widths: 12" (8 holes), 15" (12 holes), 18" (14 holes), 24" (20 holes).

Full height HD utility panel for end of aisle unit. Fast and easy hook-on assembly. Capacity: 50 lb/square foot, maximum of 500 lb per panel, evenly distributed load.

Installs on the back of a shelving unit.

Doors open 180°, with recessed lock and handle. Frame spaced to allow for installation of Rousseau modular drawers.

Doors with polycarbonate panels ensure you can see contents. They open to 180°, with recessed lock and handle.

Full-width handle. Installs between 2 shelves.

Doors open 180°, with recessed lock and handle. Simple and fast assembly.

Doors with polycarbonate panels ensure you can see contents. They open to 180°, with recessed lock and handle.

Dividers are attached one into the other. Two nylon clips provided with each divider.

Innovative divider, facilitates easy position changes. Easy installation, without tools.

Excellent corrosion and chemical resistance. Superior rigidity to plastic rods currently used on the market for this type of application.

Supports parts and boxes that are stored vertically in a Mini-racking unit. Parts lean against "D" shape of the divider. Divider can be adjusted laterally (left to right) without tools.

Divides those parts that lean vertically against the back of the Mini-racking. Divider can be adjusted laterally (left to right) without tools.

The shelf is reversible and its edge may serve as a back stop for plastic bins or binders. Available in 3 widths: 13" (14 holes), 15" (16 holes) and 31" (32 holes).

You can store many different parts, tools and accessories using our family of heavy-duty hooks. WM9A : Heavy-duty square hook. WM9B : Heavy-duty round hook.

Very useful for hanging plastic bins, making it easy to store small parts. The side security notches ensure stability. 30 lbs capacity.

Very useful for storing products of all kinds, such as cans of different sizes. The side security notches ensure stability.

You can store many different parts, tools and accessories using our family of light-duty hooks.

Can be used to store up to 6 pliers.

Keeps 6 to 12 screwdrivers close at hand.

For storing long tools, e.g., pry bars. Holds up to three long tools. Easy to install.